The Dräger accuro hand pump is used in conjunction with Dräger-tubes for the sampling of toxic gases and vapors. The Dräger accuro is a bellows pump, with which the air sample is drawn through the Dräger tube using strokes. The body of the pump consists of a bellows, which is completely pushed together for the measurement. When the bellows is released, the air is drawn automatically and the gas sample to be measured is sucked through the tube being used. The sampling process is completed when the body of the pump has opened completely. The end of a stroke is indicated by a pressure-controlled display on the body of the Dräger accuro pump. Measurements must often be taken in extreme conditions, such as up ladders, in shafts, or where heavy breathing protection is required. The accuro gas detector pump can easily be operated with one hand, and allows reliable measurements in locations that are difficult to access. Available as a pump only, a soft-side kit (includes accuro pump, tube opener, spare parts kit, allen wrench and nylon transport case) or a hard-side kit (includes accuro pump, tube opener, spare parts kit, Rubber Caps, allen wrench and molded plastic carrying case)This section includes gases from Pentane 100/a to Xylene 10/a