GasAlertMicro 5 PID 5-Gas Detector from BW Technologies
- Smaller and over 50% lighter than competitive instruments
- Water-resistant design in an integral concussion-proof enclosure
- Continuous LCD shows simultaneous gas concentrations for five gases
- 0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds)
- Integral motorized pump option for remote sampling
- Two power options: AA alkaline or rechargeable hot-swappable battery pack
- Provides 95 dB alarm tone and two bright wide-angled alarm bars
- Equipped with internal vibrating alarm for high noise areas
- Multi-language support in English, French, German, Spanish, and Portuguese
- Three backlight options: standard- activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only- activates in alarm conditions and reactivates on-demand; stealth mode
- Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxic gases
- Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
- Records TWA, STEL, and maximum exposures to gas and displays readings on command
- User selectable field options include: PID correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching alarm, 'SAFE' display function, stealth mode, and selectable ppm resolution for some gases (e.g. SO2 0.1 ppm)
- Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms
- Monitors for: VOCs (PID), H2S, CO, O2, SO2, PH3, NH3,NO2, HCN, Cl2, ClO2, O3, and Combustibles
Available in:
-
Instrument only model (Part # 467-M5PIDXWQYAD0YN00) with PID (VOCs), Combustibles (%LEL), Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S).
-
A confined Space Kit (Part # 467-M5PIDXWQYAD0YN09) that includes the standard version above plus a foam lined carrying case for instrument & accessories, 34 L cylinger(s) of calibration gas required for sensors installed, 1.0 LPM calibration regulator (male) and tubing.
-
A confined space kit like the one about but without the gas or the regulator (Part # 467-M5PIDXWQYAD0YN01)
Other configurations and options available. Please call for assistance.